• Rookie
DC DC EXPENHO CONVERSOR DE APOSSE 2-24V A 3-30V 4A 80W CC CV Módulo de energia Ajuste regulada ajustável 3,7V 6V 9V 12V com USB

DC DC EXPENHO CONVERSOR DE APOSSE 2-24V A 3-30V 4A 80W CC CV Módulo de energia Ajuste regulada ajustável 3,7V 6V 9V

Avaliação:
€ 18.70

Figura do produto
Existente

DC DC EXPENHO CONVERTOR DE APOSSE 2-24 V A 3-30 V 4 A 80 W CC CV Módulo de energia CV SONDA AJUSTÁVEL RESPONSABILIDADE 3,7 V 6 V 9 V 12 V com USB DC DC EXPENHO CONVERTOR DE APOSSE 2-24 V A 3-30 V 4 A 80 W CC CV Módulo de energia CV SONDA AJUSTÁVEL RESPONSABILIDADE 3,7 V 6 V 9 V 12 V com USB. Recurso : Arquitetura especial, suporta a entrada de baixa tensão de 2 V, sem medo de baixa tensão, especialmente adequada para o aumento de 18650 de alta potência. A corrente constante de tensão constante pode ser conectada diretamente à bateria para carregar. Alta eficiência, filtragem em estágio duplo e desempenho baixo, confiável e estável! Especificação : Tensão de entrada : 2 -24 V Tensão de saída : 3 -30 V. (Observe que a porta USB está diretamente conectada à porta de saída, que é uma porta de tensão ajustável de 3-30 V, não uma porta de 5 V!) Corrente de entrada : até 15 A Corrente de saída : 4 A Máximo (CC Posicionador é o potenciômetro de regulamentação de corrente .

Folha de dados

Input voltage:
2 -24V
Output voltage:
3 -30V. (Note that the USB port is directly connected to the output port, which is an adjustable voltage port of 3-30V, not a 5V port!)
Input current:
up to 15A
Output current:
4A maximum (CC positioner is the current regulating potentiometer. When the current limit is reached, the CC indicator lights up.
Output power:
3.7V input, maximum 45W, 12V input, maximum power 80W
Output ripple:
two-stage filtering, low ripple output!
Conversion efficiency:
82-95%
Input overcurrent protection:
15A fuse
Input anti-reverse protection:
high efficiency MOSS
Input undervoltage protection:
To prevent over-discharge of the lithium battery, solder 5. 5k resistance resistor at the lower left corner of the module.
 :
Notes:
1. BOOST boost structure, the regulation limit current can not be directly shorted to the output terminal. The CC potentiometer can be adjusted to the minimum counterclockwise. After the battery is connected, the current is rotated clockwise. :
2. BOOST boost structure, the minimum output voltage is approximately equal to the input voltage, so the output current cannot be set from 0, and the minimum output current is approximately the input voltage divided by the load resistance value. :
3. The module input IN-disable is shorted to the output-OUT, otherwise the constant current function is disabled. :
4. Ensure that the power of the power supply is greater than the power required by the output load. Reduce the power usage when the mo :

Escolha do cliente

Boletins

Inscreva-se agora e obtenha cinco melhores ofertas com desconto hoje.